250 Watt Low Pass Filter

Part Number 104

0 Review(s)

Price

Your Price:

$55.00

Quantity

Description

250 Watt Low Pass Filter

A high quality, high performance and competitively price low pass filter for all 50 ohm pallet amplifiers up to and including 250W continuous power.

86-110MHz
0.30 dB insertion loss maximum; 0.25 dB typical.
-25dB return loss maximum; -28dB typical.
Metal clad silver teflon caps from CDE.
#14 Awg Inductors.
-45dB rejection at 176MHz. That's the 1st harmonic of 88MHz
Size: 2.75 inches wide x 3.75 inches long x 0.625 high.
Each unit is sweep tested on an HP 8753D network analyzer to meet our specifications
.25dB maximum insertion loss, better than -20dB return loss from 88-108MHz..
RF connectors are not included. A coax can be soldered directly or the product can be installed in an enclosure (customer supplied)
Mounts to customers chassis with 8-32 screws. 3/8 inch PCB standoffs or washers are required between the bottom of the PCB and chassis to prevent shorting of the inductors. Installing the filter in a metal chassis is suggested to provide shielding and good thermal conductivity in high power installations.
This low pass filter is intended for use in 50 ohm systems only.